User's Manual
Table Of Contents
- Creative Sound Blaster Wireless Entertainment
- Contents
- Introduction
- Your Sound Blaster Wireless Entertainment At A Glance
- Getting Started
- Using Your Remote Control
- About Music Files
- Frequently Asked Questions
- Maintenance and Safety Advice
- Technical Specifications
- Glossary
- Ad-hoc mode
- Antenna
- Access Point (AP)
- Bandwidth
- BSS (Basic Service Set)
- DHCP (Dynamic Host Configuration Protocol)
- Dynamic IP address
- Encryption
- IEEE 802.11
- IEEE 802.11b
- IEEE 802.11g
- Infrastructure mode
- IP (Internet Protocol)
- IP address
- LAN (Local Area Network)
- MAC (Media Access Control) address
- Router
- SSID (Service Set Identity)
- Static IP address
- TCP/IP (Transmission Control Protocol/ Internet Protocol)
- USB (Universal Serial Bus)
- WEP (Wired Equivalent Privacy)
- Wi-Fi
Your Sound Blaster Wireless Entertainment At A Glance 2-5
Pause button ❍ Pauses playback
MODE button
❍ Toggles between Normal, Repeat, Repeat All and
Shuffle play modes
❍ Assigns a Remote Control to a Wireless MP3 Receiver.
This lets you a Remote Control with different Wireless
MP3 Receivers. See "Using Your Remote Control" on
page 4-1 for more information.
MUTE button
❍ Mutes the volume. appears on the LCD when the
volume is muted.
Volume buttons ❍ Increases or decreases playback volume
FAVORITES
buttons
❍ Play back Favorite Playlists that you have assigned to
these buttons. You can use
Wireless Entertainment
Application to assign Favorite Playlists. For more
information about using
Wireless Entertainment
Application, refer to its online help.
1
1
1
2
1
3
1
4
1
5