User's Manual

6. How do I enable Voice Prompt?
On a speaker with disabled voice prompt, ensure that it is powered ON. Press both Volume “+“ and
Multifunction Button at the same time. A prompt is heard indicating voice prompt is enabled.
7. Why is my speaker unable to power off automatically after 15 mins of inactivity?
Ensure that there are no Bluetooth devices connected to the speaker and that the Aux-in does not have a
music / noise signal on it. Please also ensure that that the speaker is also not in the following modes:
- Audio playback from microSD card
- Recording onto microSD card
Please note that power is supplied through the connected USB cable via DC out (USB output) whenever a
device is attached to the speaker even when the speaker is OFF.
8. Why do I hear beep tones when I disable voice prompts?
The beep tones are meant to be indicators for the following items:
1 beep tone Feature activated indicator
2 beep tone Feature confirmation indicator
3 beep tone Error indicator
Additional Support
If you encounter any other issues or have any other enquiries about your iRoar or any other Creative
products, please visit our comprehensive knowledge base at support.creative.com or
www.soundblaster.com for additional information.
Troubleshooting and Support 38