User's Manual

Building Home Stereo Systems
The MegaStereo cable* allows you to link two Creative iRoars together, to create individual left and
right channels to achieve a wider sound stage. In this setup, one speaker acts as a left (Master) channel
and the other Roar speaker acts as a right (Slave) channel.
1 - Master (Left)
2 - Slave (Right)
3 - MegaStereo cable
(available separately)
1. Ensure that both speakers are powered off.
2. Connect the MegaStereo cable accordingly to the diagram above.
3. Turn on the speaker labelled Master (Left) first, then turn on the speaker labelled Slave (Right).
4. Adjust the volume on the Slave (Right) speaker to maximum.
You will hear a beeping sound which indicates that you have reached the maximum volume.
5. Play music from your Bluetooth, MicroSD card or USB audio only from the Master (Left) speaker.
6. Adjust the volume only from your Bluetooth device or on the Master (Left) speaker.
For optimum sound performance,
l Connect both speakers to their power adapters.
l Enable the TeraBass of the master speaker only.
Power Off Sequence:
With both units powered ON, power OFF the Slave (Right) speaker then the Master (Left) speaker.
Using Your Audio Device 19