User's Manual

Control or Jack Description
7 SBXbutton/indicator Toggles SBX Pro Studio audio enhancements
ON/OFF.
The SBX Pro Studio is ON when the LED is lighted
and dimmed otherwise.
8 Built-In Microphone
Array
For voice pickup and recording.
9 NFC sensor Tap NFC device to connect.
Back
1112
14
15
16
17
18
19
20
21
22
13
10
23
24
Control or Jack Description
10 Speaker Output
terminal (Left)
Connects to the Left input of passive speakers.
11 Headphone Stand
slots
For installing the supplied headphone stand.
12 Speaker Output
terminal (Right)
Connects to the Right input of passive speakers.
13 Impedance switch Set switch to 4 ohm or 8 ohm to match speaker
impedance.
14 RCA Line-Out jack
(Front Right)
Connects to the Front Right input on powered analog
speakers or an A/V receiver.
15 RCA Line-Out jack
(Front Left)
Connects to the Front Left input on powered analog
speakers or an A/V receiver.
16 3.5mm Line-Out
jack (Rear L/R)
Connects to the Rear Left and Rear Right inputs on
powered analog speakers or an A/V receiver.
About Your Hardware - 4 -