User's Manual

l Power Consumption:
o
Power consumption during standby/off : < 0.5 W
o
Power consumption during networked standby for each network port (Bluetooth, USB): < 6.0 W
o
Power consumption during networked standby when all network ports are activated: < 10 W
o
When the device is powered on and connected to mains with no audio playback and not
performing other main functions,
n the device will enter networked standby mode within 20 minutes.
n the device will enter standby mode in 80 minutes after all network ports are
deactivated/disconnected.
l Bluetooth Technology:
o
Version: Bluetooth 4.1 LE (Low Energy)
o
Bluetooth Profiles:
n A2DP (Wireless Stereo Bluetooth)
n AVRCP (Bluetooth Remote Control)
n HFP (Hands-Free Profile)
o
Operating Frequency: 2402 - 2480 MHz
o
Operating Range: Up to 10 meters / 33 feet
(Measured in open space. Walls and structures may affect range of device.)
o
To disable/enable the Bluetooth module, refer to Troubleshooting and Support - Sound
Blaster X7 Controls and Indicators.
l Audio Performance:
o
Signal-to-Noise Ratio (DAC): 127 dB
o
Signal-to-Noise Ratio (ADC): 123 dB
o
24-bit Analog-to-Digital conversion of analog inputs at up to 96 kHz sample rate
o
24-bit Digital-to-Analog conversion of digital sources at up to 192 kHz sample rate
o
24-bit recording sampling rates: 44.1, 48, 88.2, 96 kHz, 192 kHz
o
24-bit playback sampling rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
o
Stereo Direct Playback at 24-bit / 44.1, 48, 88.2, 96, 176.4, 192 kHz
o
Surround Playback (Dolby Digital) at 24-bit / 44.1, 48, 88.2, 96 kHz
o
Frequency Response (24-bit / 192 kHz):20 Hz - 90 kHz
l Amplifier:
o
Maximum Power Output
n 50 W +50 W (4 ohm, 1 kHz, 10% THD)*
n 38 W+ 38 W (4 ohm, 1 kHz, 10% THD)**
n 27 W+ 27 W (8 ohm, 1 kHz, 10% THD)**
o
Rated Power Output
n 37 W +37 W (4 ohm, 1 kHz, 1% THD)*
n 35 W+ 35 W (4 ohm, 1 kHz, 1% THD)**
n 20 W+ 20 W (8 ohm, 1 kHz, 1% THD)**
o
Total Harmonic Distortion:
n 0.05% (1 kHz, 4 ohm, 33 W)*
n 0.05% (1 kHz, 4 ohm, 30 W)**
Note:
General Specifications - 33 -