Instructions / Assembly

STANDARD SWING SEAT WITH CHAIN
Blue Sky Play PT 1004 7-31-2016
2700 Riverside Drive For Customer Service, Call: 844-801-5828
Chattanooga, TN 37406
WARNING: This accessory must be assembled by an adult.
This accessory is intended for residential use only.
This accessory intended for children 3-10 years of age. Weight Limit: 150 lbs.
NOTE: Swing Hangers are sold separately.
Specications subject to change without notice.
Manufactured for Blue Sky Play
Made in China
Assembly Instructions:
1. Taking one length of chain from the coated end, place the outermost link through the Standard Quick Link
as shown in (Fig. 1).
2. Insert the Quick Link through the Swing Seat Grommet as shown in (Fig. 2).
3. Close and tighten the Quick Link Sleeve with an appropriate wrench as shown. Once tightened the seat
should be securely attached and the Quick Link should not be easily loosened, as shown in (Fig. 3).
4. Repeat steps 1-3 to attach second chain to swing seat with Standard Quick Link.
5. Note: When hanging swinging accessories on your playset, there must be a minimum 8’’ clearance
between the bottom of the swing seat and the top of the surfacing. A minimum clearance of at least
8’’ from adjacent swinging accessories or play equipment support structures is also required.
6. Hang one chain from each swing hanger. Using a suitable set of pliers, crimp the hook opening on each
swing hanger completely closed to fully secure the swing seat to the swing hangers, as shown in (Fig. 4).
7. Make certain all connections are completely secure before allowing children to use the installed play
accessories.
WARNING: Improperly secured Quick Links could cause serious injury. Make certain all Quick Links are
properly secured before allowing children to use the product.
WARNING:
Make certain Swing
Hanger is crimped
completely closed.
Fig. 1
Fig. 2 Fig. 3
Fig. 4
STANDARD SWING SEAT WITH CHAIN
BP 010
BOTTOM
OF
SEAT
BOTTOM
OF
SEAT
Tools Required:
PLIERS WRENCH