Instructions / Assembly
STEERING WHEEL
Blue Sky Play PT 805 7-24-2016
2700 Riverside Drive For Customer Service, Call: 844-801-5828
Chattanooga, TN 37406
WARNING: This accessory must be installed by an adult.
This accessory is intended for residential use only.
This accessory intended for children 3-10 years of age.
Specications subject to change without notice.
Manufactured for Blue Sky Play
Made in China
Assembly Instructions:
1. Choose the location on your Swing Set for your Steering Wheel. Drill a 5/16’’ hole through the
supporting lumber.
Note: If the supporting lumber is thicker than 2’’ you will need to counterbore the hole to a proper depth
for the hardware to secure the Steering Wheel rmly.
2. Install the Steering Wheel as shown in (Fig. 1).
Note: Make certain the Steering Wheel can turn freely once hardware is fully tightened.
3. Snap Steering Wheel Cap in place as shown in (Fig. 1).
BP 008
Tools Required:
1/2’’ SOCKET and WRENCH
ELECTRIC DRILL
Kit Contents:
(1) 5/16’’ x 3’’ Carriage Bolt
(1) 5/16’’ Lock Nut
(1) 5/16’’ Flat Washer
5/16’’ x 3’’ Carriage Bolt
Spacer
5/16’’ Diameter Hole
Steering Wheel Cap
STEERING WHEEL
(1) Spacer
(1) Steering Wheel Cap
(1) Steering Wheel
5/16’’ DRILL BIT
5/16’’ Flat Washer
5/16’’ Lock Nut
Steering Wheel
Fig. 1