Instructions / Assembly
ANCHOR KIT
Blue Sky Play PT 106 7-24-2016
2700 Riverside Drive For Customer Service, Call: 844-801-5828
Chattanooga, TN 37406
WARNING: This accessory must be installed by an adult.
This accessory is intended for residential use only.
This accessory intended for children 3-10 years of age.
Specications subject to change without notice.
Manufactured for Blue Sky Play
Made in China
Assembly Instructions:
1. Fully assemble your Swing Set and place it in your yard in accordance with its use zone.
2. Place one Anchor at each corner of your Swing Set, one at the end of each leg on the Swing Beam A-Frame.
3. Twist each Anchor into the ground until only the loop at the top remains exposed.
Tip: Slide a screwdriver through the loop and use the tool to turn the Anchor into the ground.
4. Place a metal strap through each Anchor loop and bend it upon itself, as shown in (Fig. 1).
5. Secure each loop to the unit using (1) 1-1/2’’ Lag Screw and (1) Flat Washer each, as shown in (Fig. 1).
Note: Insert the Lag Screw through the holes in the strap which secures the Anchor as tightly to the unit as
possible.
BP 001
Tools Required:
1/2’’ SOCKET and WRENCH
SCREWDRIVER
ANCHOR KIT
Contents and Hardware:
(4) 1-1/2’’ LAG BOLT
(4) FLAT WASHER
(4) ANCHOR
(4) METAL STRAP
1-1/2’’ LAG BOLT
FLAT WASHER
METAL STRAP
ANCHOR
Fig. 1