Installation Guide

ManualsBrandsCreative Cedar Designs ManualsPlayground SetsGreen Kids Platform Swing

Creative Cedar Designs

www.creativecedardesigns.com

Customer Service:

Please log onto our website and ﬁ ll out

a request for missing / damaged parts.

Email: custervice@creativecedardesigns.com

Phone: 1-888-363-4967

WARNING: CHOKING HAZARD

Unassembled parts may be a choking

hazard to children 3 years and younger.

The plastic bags that contain the hardware

may present a choking hazard to small

children. Please keep these bags and all

plastic bags out of the reach of children.

Do not allow children to play with them and

dispose of them immediately when empty.

CAUTION: Adult Assembly Required

Hardware contains small pieces with sharp

points. Keep parts out of the reach of

children until assembled. Parts of this product

can present dangers if improperly assembled

Platform Swing

Model: BP 021

Revision Date: 5/14/2019

Summary of content (8 pages)

PAGE 1
Platform Swing Model: BP 021 Creative Cedar Designs www.creativecedardesigns.com Customer Service: Please log onto our website and ﬁll out a request for missing / damaged parts. Email: custervice@creativecedardesigns.com Phone: 1-888-363-4967 Revision Date: 5/14/2019 WARNING: CHOKING HAZARD Unassembled parts may be a choking hazard to children 3 years and younger. The plastic bags that contain the hardware may present a choking hazard to small children.
PAGE 2
ATTENTION: READ THIS BEFORE USE OF YOUR PLAYSET OR ACCESSORY: Observing the following statements and warnings reduces the likelihood of serious or fatal injury. This product has been designed for single family home/residential use only and is not intended for use in any public setting. Placement in public settings constitutes misuse of this product. Play Safe Installation Checklist: → No children are to be allowed to use the equipment until it is properly installed.
PAGE 3
DIMENSIONS 40” 7” MIN 7” MIN 8” MIN SWING USE ZONE EXTENDS NO LESS THAN 158” SWINGS MUST HAVE A MINIMUM OF 8” ABOVE THE PROTECTIVE SURFACING.
PAGE 4
TOOLS REQUIRED OR 1/2” WRENCH ADJUSTABLE WRENCH PARTS LIST Platform Swing (2) Rope-Chain 4
PAGE 5
STEP 1 Padding removed for clarity SNAP BUTTON ALIGN HOLES x4 x2 Long section Corner section 1. Unfold Platform Swing and connect Long Section tubing as shown. Note the snap button will lock in once aligned. The sides should be angled upward. 2. Connect Corner Section tubing as shown, then wrap the velcro around the Long Section.
PAGE 6
STEP 2 x4 x4 Rope-Chain (x2) 1. Insert rope with eye bolt thru square hole of velcro ﬂap. 2. Remove nut & (1) washer, insert into hole.
PAGE 7
STEP 3 1. Wrap velcro around Corner Sections as shown. 2. Attach to swing hangers. NOTE: Adjust chain to meet minimum dimensions.
PAGE 8
88-363-4967 Got Questions? We’ve got answers! Call our Customer Support Representatives Available Monday - Friday, 9am - 4pm (EST) Technical Support from experienced Customer Service Representatives who have actually built a swing set themselves. Visit our web site at: www.Creativecedardesigns.