Place play center set on level ground.
8
Parts Identification 2A013-10 RIGHT SIDE WALL ASSEMBLY (1 REQ.) 2A012-10 ROOF HALF SECTION ASSEMBLY (2 REQ.) 2 3/16 [55mm] 20 1/16 [510mm] 9/16 [15mm] 16 1/16 [408mm] WB2024-10 DOOR THRESHOLD (1 REQ.) 11/16 [17mm] 1 3/8 [35mm] 2A014-10 ROOF RIDGE CAP ASSEMBLY (1 REQ.) 1 [25mm] 1 3/8 [35mm] 25 9/16 [650mm] WB2044-10 REAR WALL UPPER BRACE (1 REQ.) WC2003-10 DOOR HEADER TRIM (1 REQ.
11/16 [17mm] WD2034-10 SHELF BOARD (3 REQ.) 11/16 [17mm] WD2033-10 SHELF BOARD (3 REQ.) WD2029-10 DOOR WALL SLAT (1 REQ.) 3 3/8 [86mm] 3 3/8 [86mm] 45° 41 5/16 [1050mm] 41 5/16 [1050mm] WD2087-10 WALL SLAT (1 REQ.) WD2051-10 ARCH WALL SLAT (1 REQ.) 11/16 [17mm] WE2025-10 MAILBOX FACE (1 REQ.) WD2095-10 WINDOW GUSSET (9 REQ.
Measuring hardware It is very important that you get the right hardware in the correct place when assembling the unit. You can use the ruler below to measure your hardware or you can compare the hardware to the hardware identification page. 5" 4" 3" 2" 1" 15 140 130 120 110 100 90 80 70 60 50 40 30 25 3/4" 20 1/4" 1/2" 15 0 5mm 10 0 NOTES: 1) Do not include bolt head when measuring length of bolt. 2) Include full length of deck screw when measuring.
Phase 1 Phase Hardware Back Wall Prep. SH1/4X1 3/4 Socket Head Bolts CS1/4 CUP WASHER LW1/4 Lock Washer 8 8 8 Phase Parts 2A007-10 REAR GABLE SECTION (1 REQ.) WH2063-10 LEFT CORNER BRACE (1 REQ.) 43 5/16 [1100mm] WC2080-10 CORNER TRIM (1 REQ.) 43 5/16 [1100mm] WH2103-10 RIGHT CORNER BRACE (1 REQ.) WC2006-10 CORNER TRIM (1 REQ.
Phase 3 Front Wall Assembly SH1/4X1 3/4 Socket Head Bolts Phase Hardware LW1/4 Lock Washer SH1/4X1 1/8 Socket Head Bolts 2 FW1/4 FLAT WASHER 2 4 NOTE: DO NOT OVER TIGHTEN HARDWARE. 8 10 8 WS1/8 X 1" Wood Screws CS1/4 CUP WASHER Phase Parts 41 5/16 [1050mm] WD2029-10 DOOR WALL SLAT (1 REQ.) 2A004-10 FRONT GABLE SECTION (1 REQ.) 25 9/16 [650mm] 2A002-10 RIGHT FRONT HALF WALL (1 REQ.) 2A003-10 LEFT FRONT HALF WALL (1 REQ.) WH2063-10 LEFT CORNER BRACE (1 REQ.
Phase Front Wall Assembly 8 Continued Phase Hardware WS1/8 X 3/4" Wood Screws WS1/8 X 1 1/2" Wood Screws 16 6 Phase Parts 2A014-10 ROOF RIDGE CAP ASSEMBLY (1 REQ.) 2A012-10 ROOF HALF SECTION ASSEMBLY (2 REQ.
LIMITED WARRANTY Creative Cedar Design offers many fun, interactive, and safe play centers. We only guarantee the original purchaser that this product is free of defects in materials for 30 days from the date of purchase, with the product registration card and the dated receipt as proof of purchase. Under this warranty there will be a replacement for the defective component of the play center. All parts are covered by a one year warranty.
26
PRODUCT REGISTRATION CARD Please complete this Product Registration Card along with a copy of the receipt and return to Creative Cedar Design., within 30 days of original purchase in order to validate time of purchase for warranty. Or register www.creativecedardesigns.
PRODUCT REGISTRATION CARD Please complete this Product Registration Card along with a copy of the receipt and return to Creative Cedar Design., within 30 days of original purchase in order to validate time of purchase for warranty. FOLD HERE Place Stamp Here Creative Cedar Design, Inc.
