User Manual

11
ENGLISH
PROBLEM SOLVING
PROBLEM
CAUSE SOLUTION
Unable to function
normally
1. The plug does not connect
properly.
2. The components of the
machine are not installed in
the correct position.
1. Reinsert the power plug securely.
2. Reinstall the components according to
the user manual.
Stops midway during
use.
1. The feeding cup is not
installed correctly.
2. Inserting too many
ingredients or running
continuously for too long
causes the motor to stop
automatically.
1. Make sure the feeding cup is installed in
the correct position.
2. Push the switch to the stop level and
remove the power plug.
3. Remove the feed cup and reduce the
ingredients.
4. Assemble the feeding cup, insert the
power plug and turn the switch to "STA" to
continue working.
5. If the device stops due to too long
working time, please turn off the power
of the device. Half an hour later, keep it
running.
Difculty disassembling
the pressing cup once
the squeezing is nished.
Ingredients were added too
quickly, causing a crash.
Turn the switch to "REV" and run the device
for about 3 seconds.
Louder noise during
work.
The degree of noise differs
from the type and size of
the ingredients.
Cut the ingredient into smaller pieces to
reduce the noise properly.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.