User's Manual

COPYRIGHT ©2019 CreatComm Technology
User Manual CForce N100
Max Transmission Rate
300Mbps
Hardware
Power requirement
24V PoE
Physical Interface
10/100M Base-TX (Cat. 5/5E, RJ-45) ×2
LED indicator
Power, LAN, WLAN, Signal strength indicator
Working temperature
-30℃~70℃
Storage temperature
-40℃~85℃
Working humidity
5%~95%RH Non-condensing
Equipment size
45.5x98.8x200 mm
Software
Encryption
WPA-PSK/WPA2-PSK/802.1x
Network mode
Bridge/ Router
Operating mode
Station, WDS Access point, WDS Station
Security
IP/MAC filter, SSID hidden
Network Protocol
TCP/UDP/ARP/ICMP/DHCP/HTTP/NTP
TDMA
Supported
Auto ACK Timing Adjust
Supported
Management and Logs
NTP, SNMP, Syslog, AC
Configuration
management
Support web page configuration, support AC
remote configuration, support SNMP
management
Firmware update
Support web page update, support AC remote
upgrade
Bandwidth Supported
20M/40MHz
1.2 Features
 High-performance 802.11n 2X2 MIMO chip with a maximum speed of
300Mbps.
 Supports 4 working modes: Access point, Station, WDS Access point, WDS
Station.
 The product uses the core VTrans technology, including TDMA, intelligent