User's Manual

COPYRIGHT ©2019 CreatComm Technology
User Manual CForce N100
SNMP: The SNMP agent allows network administrators to monitor network
performance and find and resolve network problems. Such as: SNMP agent is
selected to enable, SNMP community fill in a user's name, such as: user, contact
the mailbox to fill the user's corresponding mailbox such as: [e-mail],
location information fill user. Then save and apply. Install mrtg on the host, open
the mrtg web page, and you can observe the traffic through CFORCE N100.
Spectrum Analyzer: View the usage of each frequency band in the 20MHz
bandwidth of the peripheral frequency, which can help you configure the device
to avoid busy frequency bands. If you perform a spectrum scan, you will not be
able to perform any configuration operations on the device page at this time. If
you want to reconfigure your device, simply click the Exit button on the Spectrum
Scan page to exit this feature.
Figure 10-2 Spectrum Analyzer
Antenna Calibration 5G: Outdoor remote adjustment of the antenna angle used,
every few seconds to refresh the current 5G associated signal strength histogram,
the user can judge the current two devices according to the two antenna is at the
best angle.