User's Manual

User Manual CForce N100

VLAN 10 (that is, ath0 adds a virtual interface with ID 10); wired eth0 interface

needs to connect to devices that support VLAN 10 (such as VLAN switches, and

supports VLANs with ID 10).

Figure 7-5 Bridge Network

7.9 WMM Mapping

Enable WMM mapping to perform QoS on the device data stream and match

the specified data stream and adjust the priority of the specified data stream.

Different network service quality is provided for various application scenarios. It

provides better quality of service for data packets with high real-time and high

reliability requirements, and prioritizes them. For ordinary data packets with low

real-time performance, it provides lower processing priority.

WMM (Wi-Fi Multimedia): WMM is a wireless QoS protocol that is a subset

of the 802.11e protocol. It is used to ensure that packets with high priority have

priority to send, so that voice, video and other applications have better quality in

the wireless network.

AC (Access Category): WMM is divided into four priority queues: Voice,

Video, Best-effort, and Back-ground according to the order of priority. It is used to