User's Manual

User Manual CForce N100

Figure 6-2 Wireless-AP

Wireless Mode: There are totally 4 wireless modes, including: Station, Access

Point, WDS Station, and WDS Access Point.

Access point: The wireless access node, the station device connects to it, the

station device can be a computer, a mobile phone, a wireless bridge, etc., and an

AP can connect to multiple stations.

Station: It needs to be used with the AP. It connects to the AP. A station can

only connect to one AP.

WDS Station: Use WDS feature to link multiple APs in a network, all associated

stations from any AP can communicate with each other like in ad-hoc mode.

WDS station means this device is a station in WDS mode.

WDS Access Point: Use WDS feature to link multiple APs in a network, all

associated stations from any AP can communicate with each other like in ad-hoc

mode. WDS AP means this device is an AP in WDS mode.

SSID: The value used to control access to the wireless network. When other

devices connect to the device, only the set SSIDs are the same to communicate

with each other to establish a local area network.

Click the selection button on the right side of the network name to jump to

the access point information interface. As shown in the following figure, the

device can search for the network name of the surrounding wireless network, and

then the user can connect to the corresponding wireless network according to his

own needs.