Frequently Asked Questions

pass. To enable this option, change the Internal Thin Wall Type to
“Allow single extrusion fill”. This will use a dynamic single
extrusion that will adjust in size to perfectly fill the gap between
these walls. For more information about single extrusion
options,click here to view our detailed article on the subject.
(2) Change the extrusion width to fit better
In some cases, you may find that you have better luck
changing the size of the plastic that is extruded from the nozzle.
For example, if you were printing a 1.0mm thick wall, you could
achieve a fast and strong print if your nozzle was setup to create a
0.5mm extrusion. This works best for parts that have fairly
consistent wall thicknesses. You can adjust the extrusion width
that the software creates by clicking “Edit Process Settings” and
selecting the Extruders tab. Choose a manual extrusion width and
enter a value of your choosing.
20:Very Small Features Not Being Printed
Most 3D printers have a fixed nozzle size that determines the
part resolution in the XY direction. Popular nozzle sizes are
0.4mm or 0.5mm in diameter. While this works well for most parts,
you may start to encounter issues when trying to print extremely