Frequently Asked Questions

extruder toolhead, but the extruder motor will not be moving at all.
The only way to resolve this issue is to turn off the printer and
allow the electronics to cool down. You may also want to add an
extra cooling fan if the problem continues.
13.Weak Infill
The infill inside your 3D printed part plays a very important
role in the overall strength of your model. The infill is responsible
for connecting the outer shells of your 3D print, and must also
support the upper surfaces that will be printed on top of the infill.
If your infill appears to be weak or stringy, you may want to adjust
a few settings within the software to add additional strength to this
section of your print.
(1) Try alternate infill patterns
One of the first settings you should investigate is the infill
pattern that is used for your print. You can find this setting by
clicking “Edit Process Settings” and going to the Infill tab. The
“Internal Fill Pattern” determines what pattern is used for the
interior of your part. Some patterns tend to be more solid than