User Manual
17
7.6 FLASH FRAMES
Use this mode to create flashes tightly synchronised to the camera shutter. Must
be used in conjunction with a sync source such as Creamsource FlashBandit.
The duration of the flash ON and OFF is specified in Frames - e.g. Flash 1 frame
ON, followed by 3 frames OFF, repeat.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Maximum flash brightness
FRAMES OFF 1-255 No. of frames to flash OFF (i.e Skip)
FRAMES ON 1-255 No. of frames to flash ON
COLOUR TEMP 2700-6500K Approximate colour temperature
Note: Calibrate Sync mode should be run first to make sure fixture is aligned with
the camera shutter to prevent ‘torn frames’ on cameras with rolling shutter. See
next chapter.
CS_micro_UG_6PRINT.indd 17 23/01/2018 2:35 PM