User Manual

11
5.2 LCD Display and Menu
General Info Display
This is the normal display mode of the Creamsource. The current intensity
level is displayed, along with additional information in the status area at the top
of the screen:
• The text “DMX” appears when a
DMX signal is detected,
• A lock iconindicates when the
rotary wheel is locked
• The current CCT shows in the
upper right corner of the screen
• Frame rate is displayed upper right
when an external sync signal is
present.
• ‘EXT’ is displayed in upper right
when External Triggering mode is
enabled.
5.3 Low Battery Warning
If the input voltages falls below 12V,
then a flashing battery icon will
display on the screen, displaying the
approximate input voltage. If the
input voltage falls below 10V then the
LED array will switch off. However, the
display will still be operational.
Creamsource 3200KDMX
1OO%
Creamsource 3200K
11.9v
1OO%
CS_micro_UG_6PRINT.indd 11 23/01/2018 2:35 PM