User Manual
9
LCD Display and Menu
General Info Display
This is the normal display mode of the Creamsource. The current intensity level is displayed,
along with additional information in the status area at the top of the screen:
• When a DMX signal is detected, the text “DMX” appears
• When the rotary wheel is locked, a lock iconis shown
• The current input voltage is always displayed in upper right (except in BENDER
models, where the colour temperature is displayed)
• When an external sync signal is present, the framerate is displayed upper right
• When External Triggering mode is enabled, ‘EXT’ is displayed in upper right
When using special modes such as Strobe and Random, the
display will change to show the selected setting when the
NEXT button is pressed.
When the light output is turned o, the display changes to
negative mode (white text on black background).
Low Battery Warning
If the input voltages falls to a level that will cause the
light output to drop, a ashing battery icon is displayed
at the bottom of the screen. The unit can still be operated
- however you may not be getting 100% brightness, and
may also damage the batteries.