User Manual

7
Quick Release Yoke
The yoke can be quickly removed without the use of any tools. Simply ip the levers on each
side of the yoke to the UP position, and slide the yoke up and o the unit.
Lift levers to UP position
Slide yoke up and o unit
Lock yoke in place by pressing levers to DOWN position
Adjusting Quick Release Yoke
To adjust the grip of the locking levers, use a 4mm hex tool (sup-
plied) to adjust the screw when the lockers are in the DOWN posi-
tion. They should be adjusted so the lever requires rm pressure to
lock and unlock.
Yoke Safety Screws
If using the Creamsource in a xed installation for extended periods of time, please
tighten the SAFETY SCREWS for additional protection. There are two of these
screws on each side of the yoke.
!