User Manual

16
External Eects Triggering
This allows an external pulse to trigger any eects including Timed Flash and Dual Level Flash.
It is essentially a way of remotely accessing the FLASH button, and performs the same function
as pressing and releasing this button.
External triggering can be enabled by selecting
MENU->Advanced->Triggering->External Trigger
When enabled, the text EXT appears in the upper right of the LCD display.
•The Rising pulse edge triggers the eect, and is the same as pressing the FLASH button in.
•The Falling pulse edge is the same as releasing the FLASH button.
An input voltage from 5V – 24V can be used for trigger. The input impedance is 180kΩ
Accessories Port Pinout
Connector Type: LEMO 1B Socket 7 Pin
Mating Plug: LEMO 1B Plug 7 Pin FGG .1B.307
Pin Description
1 TRIGGER Input +Ve (5-24V Input, referenced to GND)
2 DMX Data (-Ve)
3 DMX Data (+Ve)
4 RS232 RX
5 RS232 TX
6 GND, Ground Reference
7 +5V Output, 200mA maximum