User Manual

15
Running from Batteries
Both the Mini and Doppio Creamsource can be run on DC battery power directly, with no addi-
tional hardware required. The Creamsource Mini also has an attachment for mounting V-Lock
or Anton Bauer batteries onto the unit. The recommended battery voltage is 24V and 32V.
DO NOT EXCEED 35V OR YOUR CREAMSOURCE MAY BE DAMAGED!
The table below shows power requirements for the dierent models of Creamsource, when run-
ning at maximum brightness. Battery Amp-Hour ratings should be chosen accordingly.
Creamsource Type Wattage Current Draw @ 24V
CSM-60 Mini 150W 6.3A
CS-140 Doppio 350W 14.6A
Pinout for Creamsource Doppio
Choose a 4 core cable of >15AWG (1.5mm
2
) and wire all 4 pins
Pin Wire To
E - Ve
1 - Ve
2 + Ve
3 + Ve
Pinout for Creamsource Mini
Choose a 2 core cable of >15AWG (1.5mm
2
) and wire both pins
Pin Wire To
1 - Ve
2 + Ve
Connector types to plug into Creamsource Lamp Heads
Creamsource Connector Manufacturer Part Number
CSM Mini XLR 3 Pin Female Neutrik NC3FXX
CS Doppio Ecomate 4 Pin Female Amphenol C016 20D003 110 10
Connector types to plug into Creamsource Power Supplies
Power Supply Connector Manufacturer Part Number
CSM-PSU-160 XLR 3 Pin Male Neutrik NC3MXX
CS-PSU-450 Ecomate 4 Pin Male Amphenol C016 20H003 110 10
!