User Manual
12
RANDOM
Creates a random pattern of ashes that can be adjusted to look similar to lightning, welding
or other ashing eects. The ON/OFF button can be used to turn the eect on or o, and the
FLASH button can be used to create ‘bursts’ of random ashing
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Maximum ash brightness
FREQUENCY 1-50Hz Frequency of random eect
LENGTH 2-200mS Maximum length of any ash
VARIATION 0-100% Amount the brightness is allowed to vary
from the BRIGHTNESS setting. 0 = No
Variation (ashes will all be same bright-
ness). 100 = Flashes can be any brightness
COLOUR TEMP 2700-6500K Approximate colour temperature
TIMED FLASH
Used to create ashes of a dened duration, similar to a Studio Strobe light. A modelling level
can also be set. The ash can be triggered by pressing the FLASH button, or if ‘External Trig-
gering’ is enabled (see page 15) it can be triggered from an external source such as a camera
hotshoe.
SETTING RANGE DESCRIPTION
MODEL LEVEL 0-100% Modeling light output level
FLASH LEVEL 0-100% Light output when FLASH triggered
FLASH TIME 1/5
TH
-
1/5000
TH
Sec
Duration that light is ashed ON for
COLOUR TEMP 2700-6500K Approximate colour temperature