User Manual
10
How to Use the Menu
This display is shown when in the menu system, allowing the user to change settings. The
status area now shows the current menu level, or setting to be changed.
Use the and buttons to scroll up and down, and to
select setting to change.
Use and to adjust value up and down. Press to go
back a level.
High Speed
When using the Creamsource at 100%, it is icker free to over 10,000fps. However
when dimming, or when using a Bender which is not set to Maximum Output, icker
can become noticeable at speeds over 700fps.
There is dedicated High Speed mode on all Daylight and Tungsten units (not the
Bender) which allows for icker free at up to 2,000fps when dimming the unit. This
can be enabled by selecting: MENU->Advanced->High Speed
When in High Speed mode the dimming will not be as smooth, or as ac-
curate. For smooth accurate dimming please disable High Speed mode.
Description of Modes
Dierent lighting modes and eects such as Strobe and Timed Flash are available under
MENU->MODES.
Use the NEXT button to switch between
settings for adjustment, and then the wheel
to change that setting. Each time NEXT is
pressed, the next setting is selected
The ON/OFF and FLASH buttons can also
be used as normal to switch the eect on/
o or to create ‘bursts’.
BRIGHTNESS
FREQUENCY
LENGTH
VARIATION
COLOUR TEMP
!