User Manual

Open the printer setting option of the slicing software, and add the G90 command before
the other motion commands in the initial Gcode.
It is recommended to use the Creality Print slicing software, and the required starting Gcode
instructions have been added by default.
After pausing printing, when resuming printing, the screen reports
that the error is out of range？
During the printing process, adjusting the Z axis is effective for the current printing. If it is
saved during the printing process, SAVE_CONFIG will be triggered, which will cause the
printer to disconnect and cause the printing to fail. Therefore, it is adjusted to save after
printing.
Why does a prompt box pop up to prompt saving after
printing is completed after adjusting the Z-axis height during
the printing process?
Using the WebUI, enter the configuration file option, click Upload user-defined
configuration file.
How to import user-defined profiles?
1.On the home page or printing page: insert the USB flash drive, click "Configure"--"Other
Settings"--"Export Log", select the export location and click the export button, the default
export location is the root directory of the USB flash drive.
2. In the disconnected page: insert the USB flash drive, click "Settings" - "Export Log", select the
export location and click the export button, the default export location is the root directory of
the USB flash drive.
How to export logs?
Creality sonic pad temporarily does not support resume printing function.
Why can't resume printing after a power outage?
The photographic file will not be generated until the printing of the file model is completed.
The time-lapse photographing file cannot be generated if the printing is stopped, powered off,
or the camera is pulled out.
How to generate time-lapse photography files?
33