User Manual

1. Check whether the printer is powered on;

2. Check if the printer is ﬂashing the correct ﬁrmware version;

3. Check whether the conﬁguration ﬁle matches correctly;

4. Check whether the USB connection is stable.

5. Check whether the current version of the Creality Sonic Pad software is the latest version.

Can't connect to the printer successfully

1. Check whether the USB drive is normal, insert the USB drive into the computer, try to repair

the USB drive ﬁle system or format, or replace the USB drive and try again;

2. Check whether the USB interface is normal, and try another USB interface;

3. If the card reader is used, please try to replace the card reader (or memory card) to

determine whether the function is normal.

Abnormal reading of U drive

1.Check whether the X, Y axis motors are normal, and whether the belt is loose;

2.Conﬁrm whether the slicing printing speed and acceleration exceed the normal range of the

printer, and adjust the printing speed and acceleration appropriately. (refer to the slicing

parameters provided by Creality)

The print is misplaced

Check whether the relevant parameters of the slicing ﬁle match the connected printer model,

such as whether to enable retraction, retraction distance, retraction speed, printing speed and

other parameters. If they do not match, you need to re-adjust the parameters and re-slicing.

Severe stringing when printing

1. Try to search for other Wi-Fi and connect to conﬁrm whether it can be connected normally

(the current device supports WPA2 encryption method, but does not support WPA3, and only

supports the 2.4G frequency band);

2. Check the correctness of the password and whether the router is normal.

Can't connect to Wi-Fi network

1. Download from ﬂuidd: Open the WEB page of the device in a PC browser (refer to the

instruction manual), and download it under the time-lapse photography menu;

2. Download via USB drive: Insert the USB drive, click the "Export" button on the video details

page(Conﬁgure-Camera-Timelapse video), export the video ﬁle to the USB drive, and then

copy it from the USB drive to the PC.

How to transfer the time-lapse photography ﬁles to PC ?

pause_on_runout: true

switch_pin: ^!PC15

Notice! switch_pin needs to be conﬁrmed as the connection PIN for the ﬁlamtent run-out sensor