Instructions

13
11. Load Filament 装料
Whe the current temperature reaches the target temperature,the consumables pass the material breakage detection,and are inserted into the small
hole of the extruder until the position of the nozzle,If the consumables flow out at the nozzle,it means that the consumables have been loaded.
Method of adjusting the tightness of the extrusion spring:Arrow to right is tightening,arrow to left is lossen.(As shown in figure A)
当前温度达到目标温度时，将耗材通过断料检测，插入挤出机小孔直至喷嘴位置，看到喷嘴处有耗材流出即表示耗材已经装载完成。
调节挤出弹簧松紧度方法：箭头往右调松 往左调紧（如图A所示）