Instructions

07
7. Install Limit switch for Z axis 安装Z轴限位开关
Easier to replace the platform and adjust the belt
更换平台更容易，调节皮带更方便
1.Rotate the glass pick-and-place handleplate for platform
replacement.
1.转动玻璃取放手柄压板可进行平台更换。
2.Then manually turn the knob to the appropriate tightness
to avoid belt breakage. (as shown in figure A, three places)
2.然后手动将旋钮左右拧到适合松紧度，过紧容易造成皮带崩断。
（如图所示A三处）
A
A