To be the Chief Evangelist Ender-5 Pro Printer Guide Book To make Top-quality 3D printer ◆ This guide book is for standard Ender-5 Pro. ◆ Please plug the power cord into a three-hole power jack. ◆ Detailed instructions for use are available in the TF card. V.2.
Contents 1.Introduction....................................1 2.General List.....................................2 3.Assembly Step.......................................3 4.Cable Connection............................8 5.Screen Information........................10 6.Loading Filament...........................11 7.Bed Levelling.....................................12 8.Software Installation.......................13 9 .P r e p a r i n g t o P r i n t ............. . . . . . . . . . . . . . 1 4 10.
Notes 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Do not use the printer any way other than described herein in order to avoid personal injury or property damage. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
A、Introduction 13 14 11 1 10 2 15 12 16 3 9 4 5 1.Hot Bed 2.Levelling screw 3.Power supply 4.Switch 1 6 7 5.SD Slot and USB Port 6.Display 7.Z Stepper 8.Foot pad 8 9.Spool Holder 10.Extrusion mechanism 11.X Stepper 12.Nozzle Assembly 13.Y Stepper 14.Z Limit Switch 15.Y Limit Switch 16.
B、General List Tool List A:Top Frame B：Z-axis Frame C:2040 Profile 4Pcs D:Extruder kit E:Filament Holder F:Hot Bed No. Image Name Qty 1 Wrench & Screw driver 1set 2 TF Card & Reader 1set 3 Spatula 1 4 Pliers 1 5 0.
C、Assembly Step 8pcs M5X25 4pcs 2040 Profile Bottom Frame 3 Place the profile hole of the side upon, install the profile, but not mess with the direction.
8pcs M5X25 Note: Tighten the four screws on the top, then tight the side screws.
M5X25 4pcs Z-axis Frame 5 Note: Align the bottom profile ,then tighten the screws.
Hot Bed M4X10 4pcs 6
M4X8 2pcs 7 M4X8 M4X8 M4 T-nut 2pcs 2pcs M4X8 M4 T-nut 2pcs M5X8 M5 T-nut 2pcs
D、Cable Connection Y x Z X YY Z Exp3 E 8
Nozzle Cable Connection Bed Cable Connection *Plug the power cord into a three-hole power jack.
E、Screen Information Information Displayed Set Temperature of the Nozzle Print Speed Model Current Temperature of the Nozzle Set Temperature of the Hot Bed CurrentTemperature of the Hot Bed Part Cooling Fan Speed Current Location of the nozzle Print Time Print Progress Prompt Message Push：OK/Enter Sub Menu Turn：Change Option/Value 10
F、Loading Filament 1. Preheat Method 1 Method 2 2. Feeding Tip：How to Replace the Filament？ 1、Cutting filament near the Extruder and slowly feed new filament until they are fed into the new filament. 2、Preheating the nozzle and withdraw the filament quickly and feed the new filament. Press and hold the extruder lever then insert 1.75mm filament through the small hole of the extruder. Continue feeding until you see filament come out the nozzle.
G、Bed Levelling 1. Prepare →Auto Home. Wait for the nozzle to move to the left/front of the platform. 2. Prepare→Disable Steppers(Close stepper drive，release motor) 4 3 1 2 3. Move the nozzle the front/left leveling screw and adjust the platform height by turning the knob underneath. Use a piece of A4 paper (standard printer paper) to assist with the adjustment, making sure that the nozzle lightly scratches the paper. 4. Complete the adjustment of the screw on all 4 corners. 5.
H、Software Installation 1. Double click to install the software. 2、Double click to open the software. 13 3. Select language→Next→Select your machine→Next→Finish.
I、Preparing to Print 1.Slicing Insert TF card into computer with Reader. Open the software→Load→Select the file→Wait for slicing to finish ,and save the gcode file to TF card. 2.Printing Insert the TF card→Select Print from TF →Select the file.
J、Trouble shooting 15 15
After- Sales Service Service 1, The printer can be returned within seven days, 15 days replacement, one year warranty, lifetime maintenance. Replacement requirement 1. The appearance of the product is intact, without damage, scratches, smudges, cracks, deformation, etc.; 2. Machine parts, tools and others are complete; 3. Provide a complete and valid purchase invoice and warranty, product number should be the same.
The revision date: May 20,2019 SHENZHEN CREALITY 3D TECHNOLOGY CO.,LTD. 11F & Room 1201,Block 3,JinChengYuan,Tongsheng Community,Dalan g,Longhua District,Shenzhen,China,518109 Official Website: www.creality3d.cn Tel: +86 755-85234565 E-mail: info@creality3d.cn cs@creality3d.
