Instructions

6. Level Platform 调平平台 2
2. Gently press the platform and tighten 4 screws clockwise, and the platform can be leveled
successfully.
1. After unscrewing the leveling screws, press“Leveling" to
keep the platform and the print screen parallel.
If the platform does not stick to the print screen, do as the following:
如果没有贴紧打印屏，请进行如下操作：
3. Press“Auto-homing"，move up the z-axis to a proper position, remove the calibration card and install the resin vat back, and then tighten
the fixing screws at both ends of the resin vat.
09