Instructions

6. Level Platform 调平平台 1
Note: The printing platform has been leveled at the factory. If it needs leveling due to transportation or other reasons, please follow the steps
below to adjust the printing platform.
注意：打印平台出厂时已调平，若因运输或其他原因需要调平，可以进行以下步骤进行打印平台调平。
1. First raise the platform, then loosen rubber screws on the left
and right sides of the resin vat, and take out the resin vat.
进行打印平台的校准，首先上升平台，拧松料槽左右两侧胶头手拧螺
丝，将料槽取出。
2. Place the calibracation card on the printing screen.
将校准卡片贴合打印屏
08