User Manual

- 16 -
2.3.2 On line Printing
Online printing need to connect computer to the 3D printer by data cable. The
printer cannot be powered off in the printing process, and the computer cannot
sleep or go screensaver,or the data transmission will be failure, it is inconvenient to
use，we do not advise users to choose this way.
It is recommended to turn off the anti-virus software before installing the driver
to prevent the accidental and cause the installation to fail.
1、Connecting computer to the printer by USB cable.
2、Set up the Creality Slicer as follows.
选择 Choose“File”→“Preferences”，Choose “Pronterface UI” and click“OK”.
Choose“File”→“Machine Settings”，Select max number at serial port,Baudrate is
115200.
Load the model，This icon show that we have contacted
the computer.Click ,it will be s one new Pop-ups window.