User Manual

- 8 -
printing will be little different. you can choose the full configuration mode for specific
settings.
Profile
1、CR-100 (0.15mm), it is optimized for CR-100 3D printers to improve print
speed while achieving better print accuracy. At the same time, CR-100 printers can
achieve higher printing accuracy by choosing High Quality (0.1mm) mode.
2、 Fast (0.2mm), this mode is suitable for large-size simple models, It will
greatly shorten the printing time such as printing the cubes.
3、Normal（0.15mm），this mode is suitable for printing most models, and is the