Specification Sheet

1. Nozzles and Extruders
1.1 Printer nozzle can not be heated
1.1.1 Check all the contacts of the heating tube to ensure that the circuit is
connected properly and debug the contacts between the heating tube and the cable.
1.1.2 If the problem cannot be solved, please contact the after-sales personnel.
1.2 The screen shows that the nozzle temperature is negative /
0 / error, do not working after waiting for the file to open.
1.2.1 If the heating tube can not be heated and the temperature is displayed as room
temperature, apply for replacement of the heating tube. For specific replacement
methods, you can check the official website after-sales video or contact the
after-sales personnel.
1.2.2 If the heating tube can be heated and the temperature shows negative / 0 /
error, then apply for replacement of the thermistor, the specific replacement method,
you can check the official website after-sales video or contact the after-sales
personnel.
1.3 Extrusion motor does not work
1.3.1 Check the stepper motor cable.
1.3.2 Replace the X and E motor wiring with the replacement method and ensure
that the limit switch is not pressed.
1.3.3 If the E motor still fails to work after changing the cable, apply for replacement
of the E motor. For specific replacement methods, you can check the official website
after-sales video or contact the after-sales personnel.
1.3.4 If the X motor cannot work after changing the line and confirm that the line is
normal, apply for replacement of the main board. For specific replacement method,
you can check the official website after-sales video or contact the after-sales
personnel.
1.4 The extrusion motor is working, but the feed wheel does
not work.
1.4.1 The feed wheel is not locked, and the set screw of the feed wheel is locked. Be
careful to lock on the plane of the D-axis. For specific operation methods, you can
check the official website after-sales video or contact the after-sales personnel.