Information

Page 2 of 5
Test Report No.KZ2022018
This report may not be published except in full unless permission for the publication of an approved extract has been obtained in writing.
Conditions:
The test results presented in this report relate to the samples tested only.
This report may be reproduced and distributed to your clients, provided that it is reproduced and distributed in full.
The authenticity of this test report and its contents can be verified by contacting the laboratory.
Conclusion
Test Items
Clause 7.9.2
Penetration of filter material
Pass
Clause 7.16
Breathing resistance
Pass
Remarks:
Pass = Meet EN 149:2001+A1:2009 FFP2 Requirement
Fail = Below EN 149:2001+A1:2009 FFP2 Requirement
N/A = Not Applicable
Disclaimer Measurement Uncertainty:
Unless otherwise agreed upon, Pass or Fail verdicts are given based on the measured values without any considerations of measurement
uncertainties. Please note, every test method has a measurement uncertainty which has been evaluated by the laboratory according to
ISO/IEC 17025 requirements.
By taking measurement uncertainties into account it might happen that measured values can neither be assessed as Pass nor as Fail.