Information

ManualsBrandsCRD Light ManualsDIY & ToolsDust mask (no valve) FFP2 25 pc(s) DIN EN 149:2001 + A1:2009

Ningbo Customs District Technology Center

No.8 Huikang Road, Yinzhou District, Ningbo City, Zhejiang Province, China.

Phone:+86 574 83890791 Fax:+86 574 83890792

The Testing Center is accredited for compliance with ISO/IEC17025:2017.

The results of tests, calibrations and/or measurements included in this document are traceable to Chinese/national standards.

CNAS is a signatory to the ILAC mutual recognition arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports.

This report may not be published except in full unless permission for the publication of an approved extract has been obtained in writing.

TEST REPORT

Selected test items from EN 149:2001+A1:2009 Respiratory protective devices―Filtering half masks

to protect against particles―Requirements, testing, marking

According to supervised product checks procedure at random intervals (C2)

The following samples were submitted and identified on behalf of the client as:

Product

Particle Filtering Half Mask

Report No.

KZ2022018

Client

Universal Certification and Surveillance Service Trade Ltd.Co.

Model(s)

YY0525

Number of samples

Received date

2020.08.17

Date(s) of tests

2020.08.17-2020.08.17

DESCRIPTION OF SAMPLES

General information

Classification

Main components

FFP2

White folding mask

Manufacturer

JIANGMEN YANYANG TRADING CO.,LTD.

Manufacturer address

NO.1,4th Floor, Building 2, NO.18 Xinyi Road, Jianghai District,

Jiangmen City, Guangdong Province, China

Chief Tester:

Feng Yun

Reviewer:

Fu Danhua

Approve:

Fu Kejie

Authorized Signatory,

Lab Director

Issued:

2020.08.17

Page 1 of 5

Summary of content (5 pages)

PAGE 1
Ningbo Customs District Technology Center No.8 Huikang Road, Yinzhou District, Ningbo City, Zhejiang Province, China. Phone:+86 574 83890791 Fax:+86 574 83890792 The Testing Center is accredited for compliance with ISO/IEC17025:2017. The results of tests, calibrations and/or measurements included in this document are traceable to Chinese/national standards.
PAGE 2
Page 2 of 5 Test Report No.KZ2022018 Conditions: The test results presented in this report relate to the samples tested only. This report may be reproduced and distributed to your clients, provided that it is reproduced and distributed in full. The authenticity of this test report and its contents can be verified by contacting the laboratory. Conclusion Test Items Clause 7.9.2 Penetration of filter material Pass Clause 7.
PAGE 3
Page 3 of 5 Test Report No.KZ2022018 Test Results 7.9.2 Penetration of filter material Pass1 The penetration of the filter of the particle filtering half mask shall meet the following requirements. Sodium chloride test 95 L/min Paraffin oil test 95 L/min FFP1 ≤20% ≤20% FFP2 ≤6% ≤6% FFP3 ≤1% ≤1% Note 1: FFP2 respirator. Test results are shown in Annex A Table 7.9.2. 7.
PAGE 4
Page 4 of 5 Test Report No.KZ2022018 Annex A: Summarization of Test Data Table 7.9.2 Penetration of filter material Test specification: EN 149:2001+A1:2009 Clause 8.11 Aerosol Condition Sodium chloride test Sample No. Penetration (%) 01 0.60 02 0.23 03 0.17 04 0.72 05 0.64 06 0.54 As received Paraffin oil test As received Assessment Pass Flow conditioning: single filter: 95.0 L/min Table 7.16 Breathing resistance (mbar) Test specification: EN 149:2001+A1:2009 Clause 8.
PAGE 5
Page 5 of 5 Test Report No.KZ2022018 Annex B: Photos of sample End of Annex B This report may not be published except in full unless permission for the publication of an approved extract has been obtained in writing.