MSDS
3. Composition/information on ingredients
Mixtures
CAS number %Common name and synonymsChemical name
7732-18-5Water
80 - 90
68476-86-8Liquefied Petroleum Gas
5 - 10
34590-94-8Dipropylene glycol monomethyl
ether
1 - 3
8028-48-6Orange, sweet, ext.
1 - 3
64-02-8Tetrasodium
ethylenediaminetetraacetate
< 1
Specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a physician
if symptoms develop or persist.
Inhalation
Wash off immediately with soap and plenty of water. Get medical attention if irritation develops and
persists.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention immediately.
Eye contact
Call a physician or poison control center immediately. Rinse mouth.
Ingestion
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. Permanent eye damage including blindness could result.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Fire-fighting
equipment/instructions
In case of fire: Stop leak if safe to do so. Move containers from fire area if you can do so without
risk. Containers should be cooled with water to prevent vapor pressure build up.
Contents under pressure. Pressurized container may rupture when exposed to heat or flame.
General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of
low areas. Many vapors are heavier than air and will spread along ground and collect in low or
confined areas (sewers, basements, tanks). Wear appropriate protective equipment and clothing
during clean-up. Emergency personnel need self-contained breathing equipment. Do not touch
damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate
closed spaces before entering them. Local authorities should be advised if significant spillages
cannot be contained. For personal protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keep
combustibles (wood, paper, oil, etc.) away from spilled material. This product is miscible in water.
Stop the flow of material, if this is without risk. Wipe up with absorbent material (e.g. cloth, fleece).
Clean surface thoroughly to remove residual contamination. For waste disposal, see section 13 of
the SDS. Prevent entry into waterways, sewer, basements or confined areas.
Methods and materials for
containment and cleaning up
Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Avoid
discharge into drains, water courses or onto the ground. Inform appropriate managerial or
supervisory personnel of all environmental releases.
Environmental precautions
2 / 9
Material name: Ultra Vinyl Cleaner
MK2718 Version #: 01 Issue date: 08-20-2015
SDS US