Datasheet

Technical data sheet
Galva Brite
Reference :
10074
Manufactured by :
CRC Industries Europe bvba
Touwslagerstraat 1
9240 Zele Belgium
Tél.: [phone] Fax : [phone]
www.crcind.com
2/3
• Pylons (telecom, power transfer,...)
• Silencers on combustion engines.
4. Directions
• Shake well before use.
• Shake until the agitator ball moves freely in the can.
• Apply to a clean, dry surface.
• Apply a thin even film.
• Best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 15 - 20
minutes.
• Do not use on energized equipment.
• Do not use on sensitive electronic equipment.
• Clean the aerosol valve by turning the can upside down and spraying until only propellant escapes.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
5. Typical product data (without propellant)
Appearance Liquid.
Color Grey.
Odor Solvent.
Density 0.969 g/cm3 (@ 20°C).
Flash Point < 0 °C
Drying time active product 240 min
Typical coat weight 30 - 40 µm
Flexibility of dry coating OK 6 mm mandrel
Adhesion on steel dry coating 0/1 GT
salt spray resistance active product 100 h
Operating temperature active product -30 till +200 °C
6. Packaging
Aerosol 12x400 ML Ref. : 10250
12x500 ML Ref. : 30423