Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
Ejector Lube
Creationdate :
07.11.18 Version : 1.0
Ref.Nr.:
BDS002406_3_20181107 (EN)
Replaces:
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
4 / 8
6.3. Methods and material for containment and cleaning up
Absorb spillage in suitable inert material
Wash spill site with water and detergent
6.4. Reference to other sections
For further information see section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Keep away from heat and sources of ignition
Do not spray on a naked flame or incandescent material.
Do not pierce or burn aerosols, even after use.
Do not breathe aerosols or vapours.
Ensure adequate ventilation
Avoid contact with skin and eyes.
7.2. Conditions for safe storage, including any incompatibilities
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or
burn, even after use.
Store in a well-ventilated place.
Store frost free
Keep out of reach of children.
7.3. Specific end use(s)
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
No information available
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
It is good practice to wear gloves and to provide adequate ventilation whenever
using the product.
In all cases handle and use the product in accordance with good industrial
hygiene practices.