Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
5-56 + PTFE
Creationdate :
11.10.17 Version : 5.1
Ref.Nr.:
BDS000239_3_20171011 (EN)
Replaces:
BDS000239_20170629
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 9
Lubricants
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
Hazardous ingredient
CAS-nr.
method
EU established exposure limits:
carbon dioxide
124-38-9
TWA
9000 mg/m3
STEL
1800 mg/m3
National established exposure limits, United Kingdom
carbon dioxide
124-38-9
TWA
5000 ppm
STEL
15000 ppm
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
It is good practice to wear gloves and to provide adequate ventilation whenever
using the product.
In all cases handle and use the product in accordance with good industrial
hygiene practices.
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type A)
hands and skin :
Depending on amount and duration of use and the risk of contact with the
product the gloves manufacturer can assist you in the selection of the right
glove material and breakthrough time.
Recommended gloves:
Nitrile
eyes :
Wear safety eyewear according to EN 166.
Environmental protection:
Avoid release to the environment.
Collect spillage.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
(for aerosols data for the product without propellant)
Apperance : physical state :
CO2 propelled liquid.
colour :
Amber.
odour :
Characteristic odor.
pH :
Not applicable.
Boiling point/range :
Not available.
Flash point :
> 70 °C