Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
Easy Weld
Creationdate :
29.06.17 Version : 4.0
Ref.Nr.:
BDS000995_3_20170629 (EN)
Replaces:
BDS000995_20130702
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 9
7.3. Specific end use(s)
Welding Products
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
Hazardous ingredient
CAS-nr.
method
EU established exposure limits:
pentane
109-66-0
TWA
1000 ppm
National established exposure limits, United Kingdom
pentane
109-66-0
TWA
600 ppm
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
It is good practice to wear gloves and to provide adequate ventilation whenever
using the product.
In all cases handle and use the product in accordance with good industrial
hygiene practices.
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type AX)
hands and skin :
Depending on amount and duration of use and the risk of contact with the
product the gloves manufacturer can assist you in the selection of the right
glove material and breakthrough time.
Recommended gloves:
Nitrile
eyes :
Wear safety eyewear according to EN 166.
Environmental protection:
Avoid release to the environment.
Collect spillage.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
(for aerosols data for the product without propellant)
Apperance : physical state :
Propane/butane propelled liquid.
colour :
Colorless.
odour :
Characteristic odor.
pH :
Not applicable.
Boiling point/range :
35 - 65 °C
Flash point :
- 45 °C (Closed Cup)