Datasheet

Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA
2/2
CRC RIGID SEAL
For machined flanges
Ref. : 10769
5. TYPICAL PRODUCT DATA
• Properties of uncured material:
Viscosity : 75000 - 90000cPs thixotropic
Specific weight : 1,05 g/ml
Color : orange fluorescent
Flash point : > 100ºC
• Properties of the material when cured (24 hours, at 23ºC and 55% of RH)
Gap filling : 0,50 mm
Breakloose torque : 12 – 20 Nm
Prevailing torque : 6 - 14 Nm
Temperature range : -50 + 180 ºC (short time 200°C)
Initial strength : 20 - 30 minutes
Final resistance : 12 - 24 hours
Shear strength : 6 – 13 N/mm²
Pressure resistance : instantly seals up to 10 bars
200 bars after full curing
• Chemical resistance
Solvent
Resistance of the bond
Short time Long time
Engine oil (0W30) Very good Very good
Petrol without lead Good Good
Hydraulic fluid Good Good
Coolant emulsion Excellent Excellent
6. PACKAGING
Squeeze bottles 50 ml
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide
variety of equipment and conditions and the unpredictable human factors involved, we recommend that our
products be tested on-the-job prior to use. All information is given in good faith but without warranty neither
expressed nor implied.
This Technical Data Sheet may already have been revised at this moment for reason such as legislation,
availability of components and newly acquired experiences. The latest and only valid version of this Technical
Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com.
We recommend you to register on this website for this product so you will be able to receive any future updated
version automatically.
Version : 10769 03 1102 02
Date : 15 July 2014