Datasheet

Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA
2/2
CRC EASY SEAL
(For couplings)
Ref. : 10768
5. TYPICAL PRODUCT DATA
• Properties of uncured material:
Viscosity (Brookfield RVT, 20 rpm, Sp.3) at 23 ºC : 17.000 – 50.000 mPa s
Specific weight : 1,0 g/ml
Flash point : > 100ºC
Maximum thread sizes : 3” (DM 80)
• Properties of the material when cured (24 hours, at 23ºC and 55% of RH)
Gap filling : 0,30 mm
Shear strength : 4 - 6 N/mm
2
Torque (ISO 10964)
break loose
: average 10 - 15 Nm
prevailing : average 1,5 – 3,5 Nm
Temperature range : -55 + 150 ºC
Elongation during rotation : > 100 %
Open time : 20 - 40 minutes
Resistant to moderate pressure : after 6 hours curing
Final resistance : 24 hours
Resistance : low
• Chemical resistance
Solvent
Resistance of the bond
Short time Long time
Engine oil (diesel 0W30) Very good Very good
Petrol without lead Good Good
Hydraulic fluid Good Good
Coolant emulsion (50% - 50%) Excellent Excellent
Potassium (50%) Excellent Excellent
Hydrochloric acid Very good Very good
Acetone Good Good
6. PACKAGING
Squeeze bottles 50 ml
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide
variety of equipment and conditions and the unpredictable human factors involved, we recommend that our
products be tested on-the-job prior to use. All information is given in good faith but without warranty neither
expressed nor implied.This Technical Data Sheet may already have been revised at this moment for reason such
as legislation, availability of components and newly acquired experiences. The latest and only valid version of this
Technical Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com.
We recommend you to register on this website for this product so you will be able to receive any future updated
version automatically.
Version : 10768 03 1102 01 Date : 15 July 2014