Data Sheet

Technical data sheet
PEN OIL
Reference : 30507
Manufactured by :
CRC Industries Europe bvba
Touwslagerstraat 1
9240 Zele Belgium
Tél.: [phone] Fax : [phone]
www.crcind.com
2/1
• Valves.
• Agricultural equipment.
• General disassembly.
• Seized and corroded parts.
4. Directions
• Spray liberally and allow to run off.
• Use extension tube for more precise application.
• Allow a few minutes for good penetration.
• Repeat if necessary.
• To remove residues or excess product, use one of the CRC cleaners.
• Do not use on energized equipment.
• Test before use on sensitive materials.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
5. Typical product data (without propellant)
Appearance Not available.
Density 0.82 (@ 20°C).
Color Black.
Odor Characteristic odor.
Flash Point > 70 °C (Closed Cup)
Surface tension active product 26 mN/m
Horizontal spread active product 90 cm²
Density active product 0.88 g/cm3 (@ 20°C).
Dynamic viscosity active product 52 mPa.s (@ 20°C).
6. Packaging
Aerosol 12x500 ML
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment,
conditions of use and the unpredictable human factors involved, we recommend that our products are tested on-the-job prior to use. All
information is given in good faith but without warranty neither expressed nor implied. This Technical Data Sheet may already have been