Information

Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA SHEET
2/2
CRC AIR SENSOR CLEAN
Ref. : 10210
Use the extension tube and spray liberally on the hot wire/plate and the thermistor. Allow
running off. Be careful not to touch the sensitive hot wire/plate nor the thermistor or its
connections with the extension tube, the aerosol or your fingers.
Allow solvents to evaporate completely before building in the sensor again. Beware to put
the sensor, o-ring or other gasket, in the right position. A small drop of CRC 5-56 on the O-
ring or gasket (do not contaminate the other parts of the sensor with oil ! ) might help for an
easy assembly.
Connect the sensor back to the electrical circuit.
A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is
available for all CRC products.
5. TYPICAL PRODUCT DATA (without propellant)
Appearance : clear liquid
Odor : typical
Distillation range : 75-85°C
Flash point (closed cup ASTM D 56) : < 0°C
Non-volatile matter : < 100 ppm
Specific gravity @ 20°C : 0,78
Kauri-Butanol value : 75
Surface tension @ 25°C : 24 mN/m
Evaporation rate (vs. ether = 1) : 2,3
Vapor density (vs. air = 1) : 3
6. PACKAGING
Aerosol: 12 x 200 ml
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide
variety of equipment and conditions and the unpredictable human factors involved, we recommend that our
products be tested on-the-job prior to use. All information is given in good faith but without warranty neither
expressed nor implied.
This Technical Data Sheet may already have been revised at this moment for reason such as legislation,
availability of components and newly acquired experiences. The latest and only valid version of this Technical
Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com.
We recommend you to register on this website for this product so you will be able to receive any future updated
version automatically.
Version : 10210 03 1004 01
Date : 21 december 2005