Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
Marker Ball
Creationdate :
29.06.17 Version : 3.0
Ref.Nr.:
BDS000383_3_20170629 (EN)
Replaces:
BDS000383_20150326
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 9
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Ensure adequate ventilation
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type A or AX)
in combination with an oil proof solid and liquid particulate filter
hands and skin :
When handling the product wear chemical-resistant gloves (standard EN 374).
The breakthrough time of the glove should be longer than the total duration of
product use. If work lasts longer than the breakthrough time, gloves should be
changed part-way through.
Recommended gloves:
(polyvinylalcohol)
eyes :
Wear safety eyewear according to EN 166.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Apperance : physical state :
Paste.
colour :
See color cap.
odour :
Characteristic odor.
pH :
Not applicable.
Boiling point/range :
124 Not available.
Flash point :
27 °C (Closed Cup)
Evaporation rate :
Not available.
Explosion limits : upper limit :
7.5 %
lower limit :
1.2 %
Vapour pressure :
107 kPa (@ 20°C).
Relative density :
< 1 g/cm3 (@ 20°C).
Solubility in water :
Insoluble in water
Auto-ignition :
370 °C
9.2. Other information
VOC = volatile organic
compounds
37.2 %
SECTION 10: Stability and reactivity
10.1. Reactivity
No hazardous reactions known if used for its intended purpose
10.2. Chemical stability
Stable