Datasheet

TECHNICAL DATA

3/3

CRC 3-36

Ref. : 10010

Heat resistance : 120°C (150°C short time)

6. PACKAGING

aerosol : 12 x 300 ml

12 x 500 ml

bulk : 4 x 5 l

5 l + sprayer

20 l

200 l

(*) Typical corrosion protection results will depend mainly on surface conditions and indoor environment. It may

be less than 1 month or more than 6 months. The first application therefore should be checked periodically for

signs of corrosion. Once the time of protection under any specific condition is determined, CRC 3-36 may be re-

applied at intervals to maintain protection.

All statements in this publication are based on service experience and/or laboratory testing. Because of the wide

variety of equipment and conditions and the unpredictable human factors involved, we recommend that our

products be tested on-the-job prior to use. All information is given in good faith but without warranty neither

expressed nor implied.

This Technical Data Sheet may already have been revised at this moment for reason such as legislation,

availability of components and newly acquired experiences. The latest and only valid version of this Technical

Data Sheet will be sent to you upon simple request or can be found on our website:

www.crcind.com.

We recommend you to register on this website for this product so you will be able to receive any future updated

version automatically.

Version : 10010 03 0800 03

Date : 25 september 2003

Manufactured by :

CRC Industries Europe NV

Touwslagerstraat 1 – 9240 Zele – Belgium

Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34