Datasheet

TECHNICAL DATA
1/3
CRC 3-36
Ref. : 10010
1. GENERAL DESCRIPTION
Multi-purpose lubricant and corrosion inhibitor.
CRC 3-36 is based on a paraffinic oil and a multiple organic inhibitor system that prevents
rust and corrosion by displacing and sealing out moisture and by forming a continuous
protection barrier against water and oxygen. The oily, almost invisible film of CRC 3-36
lubricates and penetrates into the finest pores and cracks of the surface. CRC 3-36’s
effectiveness for surface protection is derived from three of its principal properties:
• affinity for metal
• low surface tension
• high capillary action.
By its affinity for metal and low surface tension CRC 3-36 displaces moisture and separates
it from contact with the metal surface. The high capillary action contributes to the great
spreading power.
2. FEATURES
• Multi-purpose lubricant, penetrant and corrosion inhibitor.
• Displaces and seals out moisture, especially after washing or hosing off engines or
equipment.
• Penetrates through corrosion to loosen frozen parts.
• Lubricates without leaving a sticky residue.
• Cleans light soils and contaminants.
• Prevents 'fingerprinting' by its protective film.
• Protection of all metals and alloys.
• Compatible with most painted surfaces, coatings, plastics and rubbers.
• Equipped with the 360° (upside-down) spray valve for added convenience.
• Pressurised with non-flammable CO2
propellant.
• Active product content of 97%.
• Specifications : NSN 6850-00-050-0659.
3. APPLICATIONS
• PROCESS MANUFACTURING :
- Heat treated parts
- Machined surfaces
- Finished welds
- In-process aluminium extrusions
- Precision mechanisms
• MACHINING :
- Fixtures
- Dies
- Jigs
- Shim stock
- Chucks
- Drill rod
Manufactured by :
CRC Industries Europe NV
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com