Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
GalvaColor
Creationdate :
15.06.20 Version : 3.3
Ref.Nr.:
BDS000188_3_20200615 (EN)
Replaces:
BDS000188_20181010
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
6 / 11
National established exposure limits, United Kingdom
ethylbenzene
100-41-4
TWA
100 ppm
STEL
125 ppm
1-methoxy-2-propanol; monopropylene glycol methyl ether
107-98-2
TWA
100 ppm
STEL
150 ppm
4-methylpentan-2-one; isobutyl methyl ketone
108-10-1
TWA
50 ppm
STEL
100 ppm
2-methoxy-1-methylethyl acetate
108-65-6
TWA
50 ppm
STEL
100 ppm
dimethyl ether
115-10-6
TWA
400 ppm
STEL
500 ppm
xylene
1330-20-7
TWA
50 ppm
STEL
100 ppm
National established exposure limits, Ireland
ethylbenzene
100-41-4
TWA
100 ppm
STEL
200 ppm
1-methoxy-2-propanol; monopropylene glycol methyl ether
107-98-2
TWA
100 ppm
STEL
150 ppm
4-methylpentan-2-one; isobutyl methyl ketone
108-10-1
TWA
20 ppm
STEL
50 ppm
2-methoxy-1-methylethyl acetate
108-65-6
TWA
50 ppm
STEL
100 ppm
dimethyl ether
115-10-6
TWA
1000 ppm
STEL
-
xylene
1330-20-7
TWA
50 ppm
STEL
100 ppm
2-butanone oxime; ethyl methyl ketoxime; ethyl methyl ketone oxime
96-29-7
TWA
3 ppm
STEL
10 ppm
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Ensure adequate ventilation
In all cases handle and use the product in accordance with good industrial
hygiene practices.
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type AX)
hands and skin :
When handling the product wear chemical-resistant gloves (standard EN 374).
Recommended gloves:
Nitrile
The breakthrough time of the glove should be longer than the total duration of
product use. If work lasts longer than the breakthrough time, gloves should be
changed part-way through.
Depending on amount and duration of use and the risk of contact with the
product the gloves manufacturer can assist you in the selection of the right
glove material and breakthrough time.
eyes :
Wear safety eyewear according to EN 166.